Should your vaping apparatus fail to function properly there are several common issues you can troubleshoot before considering a replacement. Begin with evaluating the battery — many problems stem from a depleted or faulty battery. Make sure the device is fully charged using the original charger.

If the battery does not hold a charge after multiple attempts it may need to be replaced.

Check the contact points between the tank and the battery unit. Accumulated debris or rust on the electrical contacts can prevent proper power flow. Clean with a soft, вейпер клуб магазин электронок non-abrasive paper towel to gently wipe the contact points. Avoid using water or cleaning solutions as they can damage internal components.

If you’re getting little to no output the coil might be burnt out or improperly seated. Remove the coil and check for darkening or gunk buildup. A degraded coil will appear blackened and impart a harsh, acrid flavor. Install a fresh coil and saturate the wick by dripping a few drops of e-liquid onto the wicking material before installing and filling the tank.

Vape tanks often leak under certain conditions. This often happens when the reservoir is packed too full, the coil head is loose, or the device is held at an angle for long periods. Always leave a small air gap at the top of the tank when filling. Don’t lay it sideways or upside down. Should dripping continue check the O-rings for wear or damage and replace them if necessary.

If the vape lights up but doesn’t respond to inhalation the airflow sensor might be clogged or malfunctioning. Use a dry, fine-bristled brush to remove debris from the sensor port. Not all vapes are draw-activated — some need a trigger so make sure you are using the correct mode.

If all above solutions fail check the user manual for device-specific troubleshooting tips or contact customer support. Avoid attempting to open or modify the device yourself as this can void warranties and create safety hazards. Consistent upkeep like wiping contacts and swapping coils regularly can prevent most issues from occurring in the first place.